The vibration screen is a supporting equipment for the sand production line and is a major component of heavy machinery

The vibration screen is a supporting equipment for the sand production line and is a major component of heavy machinery. It is inevitable that it will be damaged during use. In addition to the limiting factor of the service life of the screen, there are some serious problems that cause this situation, which need to be paid attention to.

The first is that the tension of the vibration screen is not enough. This is an installation problem. The screen is not installed in place, causing the mesh surface to be loose and the tension is insufficient. The vibration amplitude of the screen during the operation of the machine will be too high, and the friction will be enhanced. In this case, it will break at the edge of the screen or the edge strip.

Another reason is that the quality of the vibration screen itself is unqualified. The screen is required to be divided into two layers, and the two layers must fit tightly. If the two layers are not tightly fitted, the drill cuttings cannot be discharged in time, thereby damaging the screen.

Another reason is that the direction of the vibration production line is wrong. This is mainly a possible error of the staff. The operator believes that as long as the drill cuttings move forward, it will be fine based on the experience of using a single-axis vibration screen or a linear vibration screen, but this method is not applicable to a translational elliptical vibration screen, which causes the screen to break.

The above are the main reasons for damage to the vibrating screen. We must pay attention to it during use to ensure the safety of the screen and make it better create benefits for us.